sliding door opener used for courtyard doors and villa doors
security protection
1:Must use 240 v power supply voltagedo not use the overpressure or under voltage；
2:The door installation or maintenance, please first cut off the input power supply；
3:Please make sure to open the door machine has reliable grounding, groundingresistance < 4 m, and have leakage short cireuit protection；
4:Orbit by an appropriate location, the door machine side should firmly welding alimit block iron, iron block should be beyond the limits of'electrical limit place, canblock on both sides to walk round the body not to take off From the roller constraintsis advisable, in case ofelectrical limit failure when the gate from the constraints ofthe idler pulley on both sides cause tilting;
5:Before starting the door, should remove obstacles,The door is operation, it is strictlyprohibited to vehicles, pedestrians walking;
6:The remote controller to avoid children to play, and the control box of switch;
7:Cannot disassembly motor by oneself, maintenance work should be conducted by professionals.
Working principle and main structure and performance
This machine is consists of the motor, worm, gear, driven gear ete. The specifie motordrives the worm, the worm transfers the motion to the worm gear and the drivengear(sprocket), and the driven gear drives the rack.
The motor transfers its motion energy to the sprocket through the worm and gear.
Power supply test
1.Before use, should carefully check the power supply voltage, frequeney and otherdata is in accordance with the requirements, check whether the ground is a goodelectrical wiring is correct.
2.With special random key counterclockwise, first open the clutch, push the slidingdoor, make the door machine idle, ifopen the door machine working normally,reoceupy special random on-offkey clockwise, shut down the cluteh.
3.Put through power supply, start to open the door machine, Observe the door machinerunning situation
4.Adjust the magnets or mechanical stop position, until the door open and closedposition Comply with your Settings .
Your message must be between 20-3,000 characters!
